Need to call? (928) 632-0216
80-96 Bronco RockSolid Centered Tire and NATO Can Rear Bumper | ProtoFab RockSolid Series
SKU:
PF842C
This heavy duty bumper is made from 1/4″ sheet metal and offers the best body protection and style available for your Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.
Price range: $1,300.00 through $1,625.00
Share Product :
Facebook
Twitter
LinkedIn
Pinterest
1) This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding.
2) These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.
3) On 07/30/2023, we began using 3/4″ Heims on the Centered Swing-out bumpers. The 5/8 heims are not interchangeable with the 3/4″ heims. The 5/8″ heims with the grease zerk are rated at 6,850 lbs of static radial load. The 5/8″ heims without grease zerk are rated at 11,350 lbs of static radial load.
4) This statement applies to our 1/4″ bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn’t be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury.
Orders placed before 06/16/2025 will come WITH an unrated receiver and the 5/8″ pivot system unless ordered otherwise. They did not come with the rack lockout system unless ordered that way specifically.
Orders placed between 06/16/2025 and 09/31/2025 automatically came with a 3/4″ pivot system and the branded pivot brace as well as the rack lockout system at no additional charge. If you desire a receiver, you need to add the receiver to the bumper for an added charge.
Orders placed on or after 10/01/2025 come WITH an unrated receiver, a 3/4″ pivot system with PF branded pivot brace as well as the rack lockout system.
There have been several people who have successfully put these bumpers on pickup trucks. Please keep in mind that these bumpers are made for the Ford Bronco and the stock axles they come with. These bumpers will fit on F-Series pickups however the frame is not the same, and sometimes the bolt pattern for the spare tire will be different. Mounting the rear bumper to a pickup truck is possible, however it may require moderate to heavy modification to install the bumper properly. You will have to order the correct wheel plate to make the spare tire fit. 8 lug wheel plates are an additional $45. The frame mounts will also need to be ordered unwelded and you will need to modify/create a custom bracket for mounting. We DO NOT recommend putting these bumpers on pickup trucks unless you have an experienced fabricator contracted for the job. We DO NOT provide installation assistance in this case.
If you run into an issue with the tailgate trim hitting the cam bail when the tailgate is open, you can run a new cable stop (approx 17″) on your tailgate. Otherwise, you will have to notch the trim.
Description
This heavy duty bumper is made from 1/4″ sheet metal and offers the best body protection and style available for your Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.
This bumper includes our new unique rack which puts the tire in the center of the tailgate but we also lowered it for added visibility while still being able to accept up to a 37″ spare tire with 5.25″ backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. To add to this already awesome set-up, we added a basket between the tire carrier and the pivot system to house a 5-gallon NATO can. We put it here so there is no need to worry about adding extra leverage to the end of that long arm.
Like our standard tire rack design, this rack is made of 2″x3″ x 0.188 wall rectangular tube. The hinge uses two 3/4″ * permanently lubricated heim joints to open the rack which are rated at 15,850 lbs of static radial load and our branded pivot brace which strengthens the pivot and adds an aggressive look to the overall structure.
Included with this rugged rack is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you when you’re trying to get into the back. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.*
Related Products
Related products
-
80-96 Bronco Standard 4 Point Interior Tube Support
Price range: $446.25 through $650.00 This product has multiple variants. The options may be chosen on the product page -
80-96 Bronco 6-Point Interior Tube Support | Baja Series by ProtoFab
Price range: $1,615.00 through $2,100.00 This product has multiple variants. The options may be chosen on the product page -
66-77 Bronco Spare Tire and Gas Can Rear Bumper | ProtoFab RockSolid Series
From $1,308.75 -
66-77 Bronco Triple Rack Rear Bumper | ProtoFab RockSolid Series
From $1,698.75
Reviews
There are no reviews yet.