ProtoFab
1966-1977 Bronco RockSolid Triple Rack Rear Bumper (PF305)
1966-1977 Bronco RockSolid Triple Rack Rear Bumper (PF305)
66-77 Bronco Spare Tire and Gas Can and Cooler Basket Rear Bumper, also called the Triple Rack, is made from 1/4" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes** cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.
This bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25" back spacing and a 2nd rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) AND a 16" x 24" Cooler Basket.
These racks are made of 2"x3" x 0.188 wall rectangular tube. The hinges use two 3/4" permanently lubricated heim joints to open the racks. This ensures a smooth and easy hinge to maintain. Included with these rugged racks are two of our coveted Cam latch mechanisms which are adjustable and offer many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.***
*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.
**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.
*** This statement applies to our 1/4" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury.
Edition
| Box Kit: Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time) |
| Tack Kit: A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping. |
| Welded: Arrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish. |
Add-On's
Body Lift: Add an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.
8-Lug Wheel Plate: If your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5" or 8 x 170mm.
Looking for a cooler that will fit our cooler basket?
We recommend:
Couldn't load pickup availability
Share
