ProtoFab
1980-1996 Bronco RockSolid Triple Rack Rear Bumper (PF843)
1980-1996 Bronco RockSolid Triple Rack Rear Bumper (PF843)
This sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style available for your full-size Bronco. With its easy bolt-on installation that requires no welding or drilling, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.
This bumper includes a unique rack designed to hold up to a 37” spare tire and a 2nd rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) as well as a 16" x 24" cooler rack. These racks are made of 2"x3" x 0.188 wall rectangular tube. The hinges use two 3/4" permanently lubricated heim joints to open the racks. This ensures a smooth and easy hinge to maintain. Included with these rugged racks are two of our coveted Cam latch mechanisms which are adjustable and offer many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.**
*These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.
** This statement applies to our 1/4" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury.
Edition
Box Kit: Parts are bent and placed in a box completely disassembled. This will require several hours of welding an grinding however it is the most economical shipping option we offer.
Tack Kit: Parts are tack welded in place and shipped to you in its correct form but still requires several hours of welding and grinding.
Welded: Parts are welded in our shop and shipped to you ready to install (minus the finish).
Looking for a cooler that will fit our cooler basket?
We recommend:
NOTES:
1| If you have an XLT, you may run into an issue with the tailgate trim hitting the cam bail when the tailgate is open. To remedy this, you can run a new cable stop (approx 17") on your tailgate. Otherwise you will have to notch the trim.
2| There have been several people who have successfully put these bumpers on pickup trucks but we DO NOT recommend attempting this unless you are an experienced fabricator or have one contracted for the job. We also DO NOT provide installation assistance on F-Series trucks. Please keep in mind that these bumpers are made for the Ford Bronco and the stock axles they come with. F-Series trucks have a slightly different frames so the frame mounts will need o be ordered unwelded so that you can modify / create your own mounts. Mind the bolt pattern for your truck as well and be sure to order the correct wheel plate.
3| Interior dimension between two side wings is 76"
Couldn't load pickup availability
Share
